 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|||||||||||||
|
|||||||||||||||
 |        |
 |
||||||
|
Make / Model
|
Description
|
Comments
|
Photo
|
|
||||
|
Farm-Force / 4m
|
4m Wide, Built 2000
|
self steer front press 4m hydraulic folding. 26'' cast ring 2 row of leading spring tines. Little used.
|
 |
|||||
|
KONGSKILDE / vibromaster 5,8m
|
5.8m Wide, Built 2000
|
late model vibromaster. as been as base for a drill prototype. The folding ram are missing as well as the wheels on the center section.
|
|
|||||
|
KONGSKILDE / VIBROMASTER 5m
|
5m Wide, Built 1995
|
kkk spring tines cultivator 5m hydraulic fodling to 3m, mcomplet with front clod board, 4 depth control wheels with tyres and rear following reekie harrow.
|
|
|||||
|
KONGSKILDE / VIRROFLEX 4.5m
|
4.5m Wide, Built 1995
|
hydraulic folding tractor mounted cultivator. Each tines as a Large spring at top. At the rear of the machine there is spike roller who's act as depth control and a finisher.
|
|
|||||
|
KUHN / HR 6003DR
|
6m Wide, Built 2004
|
6m power harrow. Hydraulic fold to 2.5m for transport. C/w fast tines, leveling board maxi packer and rear light markers.
|
|
|||||
|
LELY / lelyTERRA 400-45
|
4m Wide, Built 1995
|
4m power harrow complete with heavy duty gear box, packer roller and rear and over linkage. Very genuine.
|
|
|||||
|
LEMKEN / QUARTZ 7/400
|
QUARTZ 7/400, 4m Wide, Built 2005
|
4m cultivator which can be use as a 4m front press or a rear 4m drill mate. Specs are leveling board, 2 row of gama tines, packer roller, hyd markers, double heafd stock to be push or pull. Year 2005 very little used.
|
|
|||||
|
MASCHIO / AQUILLA 6000
|
6m Wide, Built 2004
|
heavy duty 6m power harrow. Hydraulic folding, rear packer roller, c/w new quick fit tines.
|
|
|||||
|
QUIVOGNE / RLP 480
|
4.8m Wide, Built 2005
|
4.8m front mounted rollers hyd fold with 2 rows of leading tines self steer head stock. Demo condition
|
|
|||||
|
RAU / POLYMAGG 6.5m
|
6.5mm Wide, Built 2000
|
stubble cultivator 6.5m tractor mounted hydraulic fold.15 tines with duck feet, shear bolt, 7 pairs of staggered discs, tube crumbler roller. Very clean hardly used.
|
|
|||||
|
SIMBA / TOPTILTH II 3m
|
3m Wide, Built 1997
|
3m seed bed maker, front leveling bar 2 row of pig tail tine, packer roller, twin row of pig tail tines and packer roller.
|
|
|||||
|
SMS / subsoiling plough 3m
|
3m Wide, Built 2007
|
3m suboiler with 10 curve legs on 2 rows followed by a single row DD RING PACKER. Belong to our nearest neigbour.
|
|
|||||
|
SMS / Subsoiling plough HKLx
|
4m Wide, Built 2009
|
Depth cultivator HKLx is intended for medium depth cultivation of soil - up to the depth of 25cm. The surface of the soil is being tilled intensively and is prepared for further cultivation.Transport width 2,750, 16 curve tines, Working depth (mm) - 300 200 - Transport lenght (mm) 1980 Weight with roller (kg) 1995 Transport lenght with roller (mm) 2990 Working width 4m. X demo condition complet with packer DD. We have sold the rape seeder.
|
|
|||||
|
Vaderstad / NZ 12m
|
12mm Wide, Built 1990
|
12m spring tines cultivator hydraulic fold to 4m can be coverted as 9m.
|
|
|||||
|
Vaderstad / ROLLEX 1220
|
12,3m Wide, Built 1995
|
Horizontal fold cambridge rollers. Twin axle type. Rubber cushing bearing stone tray.
|
|
|||||
|
Vaderstad / TOP DOWN TD300
|
3m Wide, Built 2007
|
At the front are 22 new serrated conical discs with a diameter of 430
mm on 2 rows.The cultivator section of TopDown consists of 10 rigid tineson 3 rows. These tines can be fitted with different point options - 80 or 120 mm wide. The transport wheels are 520/50/17.The rear discs level out furrows left by the tines. . These discs are mounted on rubber suspension, which ensures good contouring and high stone tolerance. The levelling discs can be steplessly controlled by the hydraulics from the tractor cab during work. The final tillage zone on TopDown consists of a row of steel rings that firm the soil. They can be lifted if not needed. The TD300 weight 4200 for 3m wide. We are only 30km'h from IMMINGHAM or 50km' from HULL DOCK. VAT 0% ON ALL EEC SALE.
|
|
|||||
|
Vaderstad / TOP DOWN 500
|
5m Wide, Built 2006
|
At the front are 38 serrated conical discs with a diameter of 430
mm on 2 rows. The cultivator section of TopDown consists of 18 rigid tines on 3 rows. These tines can be fitted with different point options - 80 or 120 mm wide. The transport wheels are 520/50/17. The rear discs level out furrows left by the tines. These discs are mounted on rubber suspension, which ensures good contouring and high stone tolerance. The levelling discs can be steplessly controlled by the hydraulics from the tractor cab during work. The final tillage zone on TopDown consists of a row of steel rings that firm the soil. They can be lifted if not needed. The TD300 weight 6700 for 5m wide, 3m on transport.We are only 30km'h from IMMINGHAM or 50km' from HULL DOCK. VAT 0% ON ALL EEC SALE.
|
|
|||||
|
Vaderstad / REXIUS 14m
|
14.m Wide, Built 2002
|
cambridge roler 14m.fold horizontaly to 2.5m. Twin axle vgo.
|
|
|||||
|
Vaderstad / TOPDOWN 300
|
3m Wide, Built 2007
|
At the front are 22 serrated conical discs with a diameter of 430
mm on 2 rows.The cultivator section of TopDown consists of 10 rigid tineson 3 rows. These tines can be fitted with different point options - 80 or 120 mm wide. The transport wheels are 520/50/17.The rear discs level out furrows left by the tines. . These discs are mounted on rubber suspension, which ensures good contouring and high stone tolerance. The levelling discs can be steplessly controlled by the hydraulics from the tractor cab during work. The final tillage zone on TopDown consists of a row of steel rings that firm the soil. They can be lifted if not needed. The TD300 weight 4200 for 3m wide. We are only 30km'h from IMMINGHAM or 50km' from HULL DOCK. VAT 0% ON ALL EEC SALE. Now sold
|
|
|||||
|
WILL RICH / 9m
|
will rich 9m, ~
|
9 m trailed cultivator. C tines on spring with duck fit point.
|
|
|||||
